TRED-eXtreme® mezzaine decking panels combine the best of two worlds—a polyethylene-wearing surface with an engineered wood substrate to create the most durable mezzanine floor available. TRED-eXtreme is specifcally engineered and manufactured for your individual project.

  • "}
  • "}
  • "}

      TRED-eXtreme® Features

      • 1/2", 3/4", 1-1/8" x 48" x 96" T&G 2 long edges (standard panel size) 
      • Available sizes to 5' x 12' T&G on all 4 edges (Cut-to-size & custom machining available) 
      • Installs directly to joists or over corrugated roof deck to provide a long-lasting and durable floor 
      • 1/16" expansion gap — 50% smaller than industry competition 
      • USDA accepted 
      • Low linear expansion—less susceptible to temperature and humidity changes than other industry panels 
      • Special anti-stat additive available to reduce static conductivity

      Laminates & Overlays

      TRED-eXtreme® panels can be laminated on one or two sides in a variety of colors, textures and thicknesses. High-Density Polyethylene (HDPE) laminate acts to deflect the load over a larger footprint; allowing for heavier loads than traditional panel products. The HDPE is a 100% moisture barrier that provides tremendous abrasion resistance. Scratches and gouges are visually minimized because the color is pigmented throughout the laminate. TRED-eXtreme panels can be engineered to accommodate heavy wheel loads.

  • .030" HDPE— Foot traffic or cart traffic when laminated to a TRED-eXtra® substrate 
  • .050" HDPE— Cart traffic or pallet jack loads when laminated to a TRED-eXtra substrate 
  • .100" HDPE— Pallet jack traffic (see chart)
  • .200" HDPE— Custom engineered for specific loads


TRED-eXtreme can be specified with three different wood-panel substrates—our TRED-eXtra panel, Plywood, or Oriented Strand Board. 

TRED-eXtra— Heaviest duty substrate without added cost. TRED-eXtra is rated and warranted for wheel load traffic without any laminate. When TRED-eXtra is specified as a substrate, higher wheel loads are achieved with thinner laminates. 

Plywood— Structurally rated; can be used with or without corrugated substructure and can be exposed to repeated wetting and drying cycles. (Available with Class A Fire-Rating or preservative treatment.) 

Oriented Strand Board— Structurally rated; can be used with or without corrugated substructure.




Wheel Loads





.030" HDPE

Foot Traffic
Foot Traffic Foot Traffic, Carts to 1,000#

.050" HDPE

Carts to 2,000# Carts to 2,000# Pallet Jacks to 3,500#

.100" HDPE

Pallet Jacks to 2,860# Pallet Jacks to 2,860# Pallet Jacks to 3,500#

.200" HDPE

Heaviest Loads, Small Wheels Heaviest Loads, Small Wheels Heaviest Loads, Small Wheels

Wheel loads have been determined using 3/4" substrate, independent laboratory tests and extensive field work. The rating includes the weight of the pallet jack or cart.